Login

Bestsellers

PT4115 SOT89-5

PT4115 SOT89-5

Price: €0.4500

Multi panels

Panelization

 

You can combine several similar or different PCBs in one multiple circuit board for price-saving and technical reasons, e.g. for better assembly. In this case, the panel will be produced as a large single board which can be separated at a later stage.

 

Please note:

 

A damaged circuit board (according to El. Test) will only be marked, but it will not be removed from the panel. This must be observed during assembly. A recommended surounding frame with 5-10mm widht should provided.

 

Mechanical Processing

 

Scoring

- Spacing of conductor / Cu to contour - 0.5mm

- Spacing between boards - 0.00mm

- Line thickness of PCB contour - 0.1mm

- Recommended surrounding frame - 5 -10mm

- Minimum boards thickness - 0.8mm

 

Partially miled out (with bridges) for breaking out

-Spacing of conductor / Cu to contour - 0.5mm

-Spacing between boards - 2.00mm

-Line thickness of PCB contour - 2.00mm

-Recomended surrounding frame - 5-10mm

-Minimum board thickness - unlimitted

 

Scoring and Milling combination 

-Spacing of conductor / Cu to contour - 0.5mm

-Spacing between boards when milling - 2.00mm

-Spacing between boards when scoring - 0.1mm

-Line thickness of PCB contour - 0.1mm

-Recomended surronding frame - 5-10mm

-Minimum board thickness - 0.8mm

 

Cutting

-Spacing of conductor / Cu to contour - 1mm

-Spacing between boards - 0.5mm

-Line thickness of PCB contour - 0.1mm

-Recomended surrounding frame - none

-Minimum board thickness - unlimitted